Schoeps MAB 1000 Manuel d'utilisateur télécharger pdf (Page 10)

SCHOEPS GmbH · Spitalstr. 20 · D-76227 Karlsruhe (Durlach) · Tel: +49 721 943 20-0 · Fax: +49 721 943 2050

English

Three different types of ”rider” are on each

side of the MAB 1000 microphone mounting

bracket:

Type 1 is for a stand adapter or elastic sus-

pension with 3/8" thread;

Type 2 grasps the microphone cable to isolate

it from solid-borne noise;

Type 3 has a metal tab with a hole in it, for

suspending the entire unit.

Any rider can be moved to any position along

Changing the Position of the Riders

1×

the bracket simply by loosening the knurled

nut or wing screw, pushing the rider to the

desired position, then retightening.

To arrange the first two kinds of rider in a

different order, it is necessary to remove the

plastic end caps of the MAB 1000 and to

unscrew the small screws at both ends. The

two type 3 riders which are used for hanging

the MAB 1000 can be set to any desired posi-

tion without tools or disassembly. Here is how:

push

tilt

pull

Removal:

Re-insertion:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Schoeps MAB 1000 Manuel d'utilisateur Page 10